Цитата:
Сообщение от Enx
ГлаCхютте : )
Ну так вот к Вам и вопрос: считаете ли Вы "допиленную" ЕТУ "калибром выпущенным не ЕТА" или нет)
|
Вот, кстати, немцы ответили. Наивно спросил какой там механизм стоит.
Thank you very much for your mail and your interested question.
Our wristwatches are first and foremost time measuring instruments - accurate and reliable, straightforward and functional. In order to fulfill this requirement, we fit them with tried and tested clockwork mechanisms that we elaborately modify and improve. The Teutonia Chronograph II is equipped with the movement MU 9408. The MU 9408 has an automatic with our special woodpecker neck regulation, a Glashütte three-quarter plate and characteristic surface finishes, a Stop-second and a Fast date and weekday correction. The power reserve is about 48 hours.
In the following short description you can read why this movement become an in-house one and something about the special Glashütter three-quarter plate:
We at Nautische Instrumente Mühle-Glashütte provide our
chronographs with a really special technical gem: our newly developed
three-quarter plate.
The three-quarter plate is a typical feature of high-quality Glashütte
watches. It is called this because it covers approximately three quarters
of the movement, providing stable support for the spring barrel, crown
and ratchet wheel as well as for the entire gear train.
As is tradition in Glashütte, we have equipped it with the classical
Glashütte click, which keeps the pressure on the ratchet wheel down
and thus minimizes signs of wear. Moreover, the three-quarter plate
has a removable escape wheel bridge. This bridge not only looks very
attractive with its red jewel and two blued screws, but it facilitates
above all an inspection of the watch because the escape wheel and
indeed the entire escapement can be removed and cleaned more
easily.
Our three-quarter plate also enabled us to increase the durability,
serviceability and aesthetics of the chronograph movements (ETA
7750/ETA 7753) that we use. And because we not only integrate our
three-quarter plate into them, but also design the regulation, balance
cock, automatic bridge and rotor ourselves, we stamp our own
calibration mark MU 9408 on them with pride.
(wristwatch catalogue of Mühle-Glashütte – Wristwatches 2012 collection)
I hope this information will helps you. If you have any further questions, please do not hesitate to contact us again.
Best regards,
Marie-Christin Felgner
Management Assistent