180 дней запаса хода у Greubel Forsey - Часовой форум Watch.ru
 
Вернуться назад   Часовой форум Watch.ru > Швейцарские часы > Независимые часовщики
Регистрация | Забыли пароль?

Независимые часовщики

Форум о независимых швейцарских часовщиках.
Ответ
 
Опции темы
  #1  
Старый 10.01.2017, 09:40
rc30 rc30 вне форума  
Moderator
 
Регистрация: 01.06.2008
Адрес: Moscow
Сообщений: 5,143
Сказал(а) спасибо: 3,348
Поблагодарили 27,424 раз(а) в 3,903 сообщениях
180 дней запаса хода у Greubel Forsey

Greubel Forsey представляют проект "Mechanical Nano":

[

Цитата:
GREUBEL FORSEY UNVEILS THE NEW UNIVERSE OF MECHANICAL NANO AFTER A DECADE OF FUNDAMENTAL RESEARCH, GREUBEL FORSEY IS WRITING A NEW CHAPTER IN WATCHMAKING HISTORY BY EXPLORING THE UNIVERSE OF MECHANICAL NANO. THIS ALLOWS US TO FREE OURSELVES OF EXISTING SPATIAL AND ENERGY CONSTRAINTS.

Conventional watch movement:




Mechanical Nano watch movement:



The pillars of Mechanical Nano are:
• CREATING SPACE – freeing up to 90% of the existing volume
• PROVIDING ENERGY – Freeing over 60 times more of the existing energy
• CREATING MORE EFFICIENT MECHANISMS – enhancing performance with up to 3 times less components (prototype 2016)
• RENEWING CREATIVITY – leading to unexplored complications, for example the Indicateur de Fréquence (demonstration prototype 2014)

From clock towers to wristwatches, the history of clock- and watch-making over the past four centuries chronicles the ever-increasing miniaturisation of existing mechanisms.
Greubel Forsey’s EWT Laboratory toiled away secretly for ten years, pushing the boundaries of mechanical miniaturisation until it produced its first demonstration prototype in 2014. A second prototype with a watchmaking mechanism was completed in 2016. These prototypes paved the way into this new universe of Mechanical Nano, where watchmaking truly enters the realm of the infinitesimally small.

Greubel Forsey’s research in Mechanical Nano has led to remarkable discoveries, validated by laboratory tests that point the way to this new universe. They bring us closer to realising the dream of every watchmaker over the past two hundred years – to free ourselves from the limitations of space. The technology of Mechanical Nano opens up limitless horizons, thanks to these intrinsic characteristics: requiring only a reduced number of working parts, resulting in a very much smaller volume with incredibly low energy consumption.
For watchmakers, the limited space inside the watchcase constitutes the main technical constraint. Through Mechanical Nano, we have fundamentally rethought the watch calibre and reduced its size and power consumption by the same ratio as the watchmakers who compressed clock movements to create the wristwatch two centuries ago. Up until now, the power needed to drive a wristwatch mechanism was a limiting factor in terms of creativity and innovation. Mechanical Nano opens up a wealth of possibilities so that a power reserve of several months is no longer just wishful thinking. This discipline presents us with many new challenges – and to face them, we must master physical laws that have hitherto had no bearing on watchmaking.
Greubel Forsey sees unprecedented scope for creativity and unexplored mechanical applications in this terra incognita. We have demonstrated, for example, that a watch mechanism can be powered on the energy generated by the airflow inside the movement. Mechanical Nano will also enable us to create new complications such as the Indicateur de Fréquence.

LOOKING AHEAD

Greubel Forsey will regularly share updates on these research developments in 2017 and 2018 with, notably, the fruits of research from the first two prototypes. We are now working on the first Mechanical Nano timepiece, which will be unveiled in the near future. This fascinating project is a new milestone in the history of mechanical watchmaking and lays the foundations for a new era in watchmaking.

Ответить с цитированием
Эти 5 пользователей сказали Спасибо! rc30 за это сообщение:
gromm (10.01.2017), probe (10.01.2017), Rubar (14.01.2017), serg70 (10.01.2017), sls63amg (10.01.2017)
  #2  
Старый 10.01.2017, 12:40
Laureus Laureus вне форума  
Super Moderator
 
Регистрация: 21.10.2007
Адрес: web
Сообщений: 12,591
Сказал(а) спасибо: 2,029
Поблагодарили 26,707 раз(а) в 8,763 сообщениях
Помню Картье представил часы, механизму которого вообще не нужна смазка. До сих пор ни одна технология из прототипа (а сколько лет то прошло) -- материал спирали, барабана, узлов и тд. -- не дошли до стадии внедрения хоть бы куда. Аналогично и с прошлогодним керамическим механизмом Брейтлинг...

Уверен, что это новшество из этой же маркетинговой чепухи.

ps.

Роман,

если будете на презентации данной часовой revolution, спросите, плиз, когда и в каких механизмах такое новшество запланировано? Предполагаю, что это фабрика держит в голове проект недорогих часов, поскольку особо трудоемкого декорирования механизму уже не требуется.
__________________
ПРАВИЛА ФОРУМА
Ответить с цитированием
Этот пользователь сказал Спасибо! Laureus за это сообщение:
Timur22 (10.01.2017)
  #3  
Старый 10.01.2017, 14:24
Аватар для serg70
serg70 serg70 вне форума  
Форумчанин
 
Регистрация: 21.12.2013
Адрес: Msk
Сообщений: 1,751
Сказал(а) спасибо: 2,051
Поблагодарили 5,989 раз(а) в 1,174 сообщениях
Эта же тема прошла в материалах на Ходинках

https://www.hodinkee.com/articles/gr...n-in-a-conve-2
Ответить с цитированием
  #4  
Старый 10.01.2017, 14:40
Аватар для probe
probe probe вне форума  
Форумчанин
 
Регистрация: 07.03.2008
Адрес: Московская обл.
Сообщений: 7,034
Сказал(а) спасибо: 8,615
Поблагодарили 15,867 раз(а) в 3,488 сообщениях
Что-то так и вспоминается Senfine от Parmigiani Fleurier с его революционной системой спуска и 70 днями запаса хода и последующим увеличением запаса хода до 90 дней и больше. Разговоров было немало, а выход пока что из серии "пшик".
http://forum.watch.ru/showthread.php?t=316050
Ответить с цитированием
  #5  
Старый 10.01.2017, 15:06
Laureus Laureus вне форума  
Super Moderator
 
Регистрация: 21.10.2007
Адрес: web
Сообщений: 12,591
Сказал(а) спасибо: 2,029
Поблагодарили 26,707 раз(а) в 8,763 сообщениях
Выпуск прототипов преседует разные цели. Одни, печатая прототип в буклете, пытаются продвинуть базовую массовую продукцию. Т.е. показать потенциальному покупателю, что компания вкладывает деньги в необычайные технологии, развивается и тд. Человек купил простенькие кварцевые часы за 700_2500$ от престижного бренда и доволен будущим успехом, поскольку бренд однако не простой, а с высокотехнологичным багажем.

Другие тем самым отсчитываются перед инвесторами. Однако дальше прототипов дело не идет, поскольку "что-то мешает" (однако сырой проект, сложность, коммерческая неперспективность..).
__________________
ПРАВИЛА ФОРУМА
Ответить с цитированием
Эти 2 пользователей сказали Спасибо! Laureus за это сообщение:
probe (10.01.2017), serg70 (10.01.2017)
Ответ


Быстрый переход

Похожие темы
Тема Автор Раздел Ответов Последнее сообщение
SIHH 2016: Interview with Stephen Forsey, co-founder of Greubel Forsey serg70 Независимые часовщики 0 26.01.2016 10:03
GMT Greubel Forsey peyot Независимые часовщики 69 08.11.2014 03:18
GMT от Greubel Forsey Ego Новости 14 22.10.2013 17:16


Часовой пояс UTC +3, время: 10:23.