Часовой форум Watch.ru - Показать сообщение отдельно - Два вопроса о дайверских безелях
Показать сообщение отдельно
  #15  
Старый 05.03.2010, 22:27
Martius Martius вне форума  
Форумчанин
 
Регистрация: 18.10.2009
Адрес: Россия
Сообщений: 277
Сказал(а) спасибо: 193
Поблагодарили 563 раз(а) в 104 сообщениях
Вот что пишут на http://en.wikipedia.org/wiki/Diver%27s_watch

Bezel markings

Most contemporary dive watches with conspicuous 15 or 20 minute markings on their bezels, are the result of copying a Rolex bezel design of the 1950s. Back then divers typically planned a dive to a certain maximum depth based on now obsolete US Navy dive tables, and dove according to the planned dive profile. If the dive profile allowed a bottom time of 35 minutes the diver, upon entering the water, would set the marker on the bezel, 35 minutes ahead of the minute hand. The diver calculated this with the 60 - bottom time formulae (60 - 35 = 25, for 35 minutes bottom time the diver would align the 25 minute bezel-mark with the minute hand). Once the minute hand reached the main-marker on the bezel the diver would begin his ascent to the surface. The 15 or 20 minute scale helped with timing the ascent and whatever safety stop the diver deemed necessary. For contemporary diving methods the 15 or 20 minute "count-down" bezel is quite antiquated.

Вроде английский знаю, а ни фига не понял
Может, есть тут англоговорящие знатоки дайверской терминологии?
Ответить с цитированием