|
Вот краткое описание, его можно перевести если что то совсем непонятно - пишите
Buttons:
A B
C D
C is the ‘mode’ button. Each time you press it the status changes in the small sub-dial near the number 3. From ‘Timer’, to World Time mode (which also displays day light savings On / Off or ‘AT’ for automatic) and finally ‘Alarm’, before back to time-keeping. When the hand is pointing at the day of the week – it’s in time-keeping mode
To specify home city:
1. In time keeping mode, hold down ‘A’ for about 5 seconds until watch beeps twice (important – wait until it beeps twice)
2. Press ‘D’ to change city setting by moving the stopwatch second hand
3. Use ‘B’ to cycle between daylight savings being ‘OFF’ and ‘ON’ (see 3 o’clock dial)
4. Once you have the home city set, hit ‘A’
To manually receive time-signal, set home city first then, put the watch on a window sill with its ’12 o’clock’ facing out, and hold the ‘A’ button for about 2 seconds until the watch beeps once. The stop-watch second hand will move to ‘ready’ and later to ‘work’. The watch will then sit for up to 15 minutes while it searches for the signal, before beeping and setting the hands to local time.
To check the most recent manual, or automatic reception from the atomic clock, hit the ‘A’ key once and the stopwatch second hand will move to either ‘YES’ or ‘NO’. Press ‘A’ again to return to normal time-keeping, or wait 5 seconds and watch will do it automatically
To use World-Time
1. To go to world-time mode, hit the ‘C’ (mode) button until the sub-dial near the 3 points to either ‘On / Off / AT’ for DST.
2. Wait until hands have adjusted
3. Use the ‘D’ button to advance the stop-watch second hand to the city. One second after finishing hitting ‘D’ the time will change accordingly
4. If summer time on / off needs to be toggled, hold down the ‘A’ button for about 3 seconds to toggle.
5. Once done, hit the ‘C’ (mode) button until the sub-dial near the 3 points to the day of the week, indicating you’re back in time-mode
To Swap your World-Time city to your Home city
1. To go to world-time mode, hit the ‘C’ (mode) button until the sub-dial near the 3 points to either ‘On / Off’ for DST.
2. Wait until hands have adjusted
3. Press and hold the ‘B’ button for about 3 seconds until the watch beeps. Your home city and world-time cities have now switched
4. Once done, hit the ‘C’ (mode) button until the sub-dial near the 3 points to the day of the week, indicating you’re back in time-mode
To use stopwatch:
1) In time keeping mode hit ‘D’
2) Once hands are in position, hit ‘B’ to start stop watch.
3) To stop the stopwatch, press ‘B’ again, and ‘D’ to reset
4) Once finished with the stopwatch, press ‘D’ to get back to time mode.
5) (if you want to start timing quickly – in time keeping mode, hit ‘B’ to start watch – it may take up to a second, but it will get going – then follow instruction from (3) onwards)
To use timer:
1) Press “C” (mode)until small hand (3 o’clock subdial) reaches TMR. Now watch is in timer mode.
2) Press “A” and this will move the hand around the 3 o’clock subdial in order to set the minutes for the countdown. The “60? on the dial is same as “zero”.
3) Press “B” to start timer, “D” to stop/reset. In timer mode stopwatch seconds hand moves backwards, and the hand from 3 o’clock subdial also moves backward. 6 o’clock sub-dial hand does not move, 9 o’clock subdial hand continue to show the 24 hours. Hour and minutes hand continue to show time.
4) When 3 o’clock subdial hand reaches “60? the alarm rings.
5) Press again “C” (mode) to get the 3 o’clock subdial hand pointing to the day of the week and the watch is now in time measuring mode again.
To use alarm:
1. Press ‘C’ (mode) until small hand in 3 o’clock subdial reaches ‘AL’ for alarm. Watch is now in alarm mode.
2. Hold down ‘A’ for about 2 seconds until watch beeps, confirming it is in the setting mode
3. Wait until the hands come to a stop indicating the current alarm time
4. The stop watch second hand will move to ‘ON’ at this time
5. Use ‘D’ to move hands clockwise in one minute steps and ‘B’ to move counterclockwise in one minute steps
6. After setting alarm, hit ‘A’ to exit setting mode
7. Use the ‘A’ key to toggle the stop-watch second hand between ‘ON’ and ‘OFF’.
8. Once done, use the ‘C’ (mode) button to return to time-keeping mode
To toggle alarm on / off
1. Press ‘C’ (mode) until small hand in 3 o’clock subdial reaches ‘AL’ for alarm. Watch is now in alarm mode.
2. Use to ‘A’ key to toggle the stop-watch second hand between ‘ON’ and ‘OFF’
3. Once done, use the ‘C’ (mode) button to return to time-keeping mode
|
