|
|
Цитата:
|
Peter Speake-Marin недавно закончил уникальные наручные часы для российского клиента, 'Имперский Piccadilly':
http://ahci.watchprosite.com/img/wat...age.799496.jpg Подробности по ссылке на источник. Источник: http://ahci.watchprosite.com/?show=n...i=457066&fi=16 |
Небось из правительства кто-то купил. Молоток, патриот чел!
|
Как говорил Остап: "Слишком верноподданно".
|
Speake-Marin caliber SM2
Yesterday I had the pleasure to visit Peter Speake-Marin in his workshop to get a first view of his new caliber the SM2, a caliber that he will be successively introducing in his watch models beginning next year.
To start, the vital statistics: - Diameter 32.6mm - Height: 6.2mm - Bidirectional automatic winding - 29 jewels - Hours, minutes and center seconds Peter let himself be influenced by the calibers that he was most impressed by during his years in watch repair and restoring in England. Robust calibers that never wear out. Calibers that can be repaired if necessary with reasonable means. Calibers that are conceived with the needs of the watchmaker in mind, with access and visibility of all the parts to allow easy and precise adjustments. A simple 3-hand caliber of the very highest quality and accuracy. This was the kind of caliber he set out to make. He has succeeded. http://ahci.watchprosite.com/img/wat...age.853771.jpg Above we see the completed movement with Peter's signature the winding rotor. Below we will take a look deeper inside to get a better idea of all that is happening unseen inside. Please note that although I did not take these pictures, I did see these movements and these parts. This is not a phantom, but reality in the metal. <A href="http://ahci.watchprosite.com/?page=photo.raw.forum&msid=6198251&imgid=853116&fi=16&pi=2803871&ti=468306&s=0&size=raw" target=_blank> http://ahci.watchprosite.com/img/wat...age.853776.jpg The movement is made of german silver, maillechort. After machining the pieces are deburred using micro-sandblasting which leaves the surface quality shown above. We see the plate and portions of the escape, train and anchor bridges. The barrel bridge is on its place on the plate. http://ahci.watchprosite.com/img/wat...age.853781.jpg Here is the rough movement with all the bridges in place. http://ahci.watchprosite.com/img/wat...age.853786.jpg The movement has a great feeling of depth, a massiveness in witness of its designed robustness. http://ahci.watchprosite.com/img/wat...age.853791.jpg] Here the same pieces after decoration. For the decoration Peter has taken his queue from his own "Foundation watch". Cerclage with polished bevels, the internal surfaces and dial side are finished with spotting. http://ahci.watchprosite.com/img/wat...age.853796.jpg4] The barrel and escape bridges. http://ahci.watchprosite.com/img/wat...age.853801.jpgE] The finished plate, barrel bridge, train bridge and escape bridge. The anchor and balance bridges are mounted. The escape wheel bridge is mounted on the main train bridge and can be removed separately to allow the escapement to be removed with out dismantling the whole train, when it is removed a window appears that has been machined in the lower bridge to aid assembly and control of the wheels underneath. http://ahci.watchprosite.com/img/wat...age.853806.jpg http://ahci.watchprosite.com/img/wat...age.853811.jpg |
The bridges are positioned by the threaded inserts, pieds-vis, that the bridge screws screw into. The two pieds-vis for the balance bridge are seen at the top left here. This system assures maximum rigidity and positioning accuracy for the bridges. An added measure to assure robustness is that the bridges are all held with at least 2 screws, the train bridge with 4!
http://ahci.watchprosite.com/img/wat...age.853816.jpg Here we can see the gearing for the automatic winding. The reversers bi-directional system is made of 19 components and ensure every movement of the rotor is transmitted into the barrel. The gear teeth in the reversers are not symmetrical. They are made so that they will work perfectly turning in one direction, but block when turning in the other. Between the high tooth count of the internal driving pinion and the threefold symmetry of the blocking gears an absolute minimal hysteresis has been achieved to assure maximum winding efficiency. The large barrel assures an autonomy of approximately 80 hours. http://ahci.watchprosite.com/img/wat...age.853821.jpg http://ahci.watchprosite.com/img/wat...age.853826.jpg The anchor bridge is seen here in the foreground. The bridge is massively thick and held by three screws to assure absolute stability and robustness , the balance cock is also held by two screws again for rigidity of design. The movement is not plated, but retains the warm sheen of the natural maillechort. The surfaces are brushed circularly, all the angles polished by hand. http://ahci.watchprosite.com/img/wat...age.853831.jpg The opening window between the plate and the bridge at the left is an aid for the watchmaker allowing inspection of the going train , as is the low section around the balance to allow the watchmaker to view adjust the balance with ease. http://ahci.watchprosite.com/img/wat...age.853836.jpg The number of large screw heads seen is witness to the robustness of the movement. http://ahci.watchprosite.com/img/wat...age.853841.jpg The wheel at the top of the movement transfers the rotor movement to the reversing system. http://ahci.watchprosite.com/img/wat...age.853846.jpg The regulation system is a double swan's neck integrated in one piece. Micro-threaded screws allow adjusting both the beat and the timing. The masslots on the glucydur chronometer style balance are to add mass and are not actively used for regulation. http://ahci.watchprosite.com/img/wat...age.853851.jpg http://ahci.watchprosite.com/img/wat...age.853856.jpg Finally the automatic rotor of brushed steel with hand polished angling is mounted. As Peter told me, the tungsten used in the rotor weight is the only portion of the movement that is sourced from his native England. Now that we have seen the movement some more details: - Frequency 21600 v/h - Shock protection incabloc & kiff - Power reserve 80 hours - Single barrel - Number of jewels 29 - Total number of components 211 - Weight of balance 0118gr inertia 25mg.cm2 - Material of bridges/main plate German silver - Chronometer balance with masslots and breguet over coil. - Movement assembled by hand - All bridges, levers and mainplate finished by hand, circling, spotting and polished. - The rotor wheel angles are hand finished then the surface is mirror finished. - All pivots burnished and Breguet overcoil lifted by hand This SM2 movement will be replacing the FW2012 movement in Speake-Marin watches during the year 2009. The pre-series of 20 have all ready been in part pre-sold and will be delivered starting in January, most equipped with an additional Quantième Pérpetuel module, and will be made in Titanium and Gold cases. I think this is great news from the Speake-Marin shop and wish Peter and his team in Rolle great success with this new caliber. Источник: http://ahci.watchprosite.com/?show=n...i=468416&fi=17 |
Как по мне - мотивы Корума налицо;):
http://i73.servimg.com/u/f73/11/63/10/32/bmjou130.jpg Источник: http://mob.watchprosite.com/show-for...ti-484476/s-0/ |
SPEAKE-MARIN picadilly sm2
Speake-Marin представит на выставке Baselworld 2009 новый мануфактурный калибр SM2, которым будут оснащены модели коллекции Picadilly.
http://leblogdesmontres.fr/wp-conten...-fond-face.jpg http://leblogdesmontres.fr/wp-conten...y-sm2-fond.jpg http://leblogdesmontres.fr/wp-conten...sm2-detail.jpg http://leblogdesmontres.fr/wp-conten...m2-calibre.jpg http://leblogdesmontres.fr/wp-conten...adilly-sm2.jpg Источник: http://leblogdesmontres.fr/2009/03/1...aselworld-200/ |
Новинки Peter Speake-Marin
Marin One (one in 20, in polished titanium case)
http://horomundi.com/forums/main/add...2F_EV_0015.jpg _EV_0015.jpg Turtle and Crane, red gold case http://horomundi.com/forums/main/add...2F_EV_0035.jpg _EV_0035.jpg SM2 perpetual calendar (one in 15, in white gold case) http://horomundi.com/forums/main/add...2F_EV_0050.jpg _EV_0050.jpg Sun (one in 20, in red gold 5N case) http://horomundi.com/forums/main/add...2F_EV_0063.jpg _EV_0063.jpg SM2 purple hand (one in 20, white gold case) http://horomundi.com/forums/main/add...2F_EV_0079.jpg _EV_0079.jpg Dual dial, white gold case http://horomundi.com/forums/main/add...2F_EV_0094.jpg _EV_0094.jpg Источник |
Speake Marin продолжает тему двуглавого орла
Неофициальные снимки нового Speake Marin, пока не названного и находящегося в процессе тестирования (на 20 июля 09). По рисунку можно предположить, что клиент (возможно тот же что и в посте #12) или из России (возможно и госслужащий) или из Священной Римской империи.
P.S. Imho крупная надпись "Switzerland" немного контрастирует с госсимволом другого государства :) Да еще гвоздь в хвост вбили - лишнее. Фирменная червовая стрелка в Picadilly немного игривая и нарочитая для орла, но в этом что-то есть. Интересно не появились ли еще музыкальные часы вроде Boegli с гимном Александрова?.. :) http://ahci.watchprosite.com/img/wat...ge.1232711.jpg http://ahci.watchprosite.com/img/wat...ge.1232706.jpg Источник: http://ahci.watchprosite.com/show-fo...ti-535166/s-0/ |
| Часовой пояс UTC +3, время: 13:18. |