Часовой форум Watch.ru - Нужна помощь

Цитата:

Сообщение от probe (Сообщение 3272559)

Я, например, не нахожу :D
На руке происходит то же самое, и полный завод что-то никого там не пугает (у меня, например, часы становятся полностью заведёнными уже через 4-5 часов ношения на руке, а часы я ношу примерно 12-13 часов в сутки). А у любых часов-автомата есть защита.

Не вижу, где вам возразить. Каждый волен гробить свои часы по своему усмотрению.

Лишь сообщу, что прежде, чем что-либо написать на публику, стараюсь хоть в какой-то мере изучить вопрос

Вот цитата с одного вполне уважаемого ресурса:

Цитата:

Most people dont understand how to use a watch winder correctly, I didnt at first.

If set correctly, a winder will keep the main spring exactly wound at the point when you put it in the winder. It will not "wind-up" the watch if set correctly to the watches specific TPD setting. I repeat.... "It will not "wind-up" the watch if set correctly."

Many people do not understand this point. If you have your winder set at 650TPD and put a watch that is not fully wound in it for a few days. When you remove the watch from the winder, the watch will NOT be fully wound. The best way to use a watch winder for long periods of time is to manually wind the watch up first, then place the watch in the winder. If you do it this way for daily or long turn use, you will never have to touch your crown. Your watch will come off of the winder and on to your wrist at its optimal main spring tension. At the end of the day, take your watch off and place it on the winder and it should be right where you left it the next morning. I have done this for 11 years with the same watch and its accuracy and reliability has been flawless.

The mistake many watch owners do is set their winders Turn Per Day too high. Sure it will wind your watch up but it will also have your internal clutch slipping every time the watch winder is activated....Bad Idea. You want your watch running at the top 3/4 of its main spring all the time either on your wrist or in the winder. This will not cause any needless wear on the clutch.

Thats pretty much it. Buy a good winder now and it and your watch should last a long time.

А вот ссылка на полный текст, посвященный алгоритму работы виндеров:
http://forums.watchuseek.com/f20/how...ks-517045.html